TOOLS AND EQUIPMENT

• Use a roller, sprayer or brush with smooth and firm bristles. Keep brush in water when not in use. Clean up with soap and water.

SURFACE PREP

• Sand or scrape surface until clear of oil-based and synthetic paints, marine varnish, waxes, dust, mildew and debris. Make sure surface is completely dry before application.

• Cracks and holes can be evened out with VAN VOTZ HI-TECH WOOD FILLER available in 18 colors that can be mixed together to match the exact tone of the wood.

DILUTION AND COLORS

• If working with very dry wood dilute the first coat with 1-part water to 1-part VAN VOTZ for enhanced absorption.

 • Increase the transparency of Semi-Transparent colors by mixing with VAN VOTZ CLEAR WOOD SEALER. VAN VOTZ colors can be blended together to create custom colors.

• The definitive finish will be visible once dry.  

APPLICATION 

• Work in a well-ventilated area away from direct sunlight. Do not apply during rain, humid conditions or in a dusty environment.

• Shake well before use.

• Apply brushstrokes along the grain of the wood. Do not retouch areas already dry.

• Apply 2 coats, or a 3rd for extra protection.

• Wait 30 to 60 minutes between coats. Sand with fine grade sandpaper after the 1st coat dries.

• On doors, apply to all four edges.

Safety Data Sheet- Van Votz Clear Waterproofing Wood Sealer